Dahua Integrated Solar Monitoring System (Without Lithium Battery)

Product Profile

Integrated solar monitoring system (without lithium battery), all in one desion, using 4G to transfer monitoring data and solar to power, which is easy/quick to install and can save wiring to the greatest extent, includes three parts: 4G network camera, integrated solar power system and camera's mounting bracket, which is more convenient for sale, order and transportation.

The integrated solar power system, integrating solar panels, maximum power point tracking (MPPT) charging controller and mounting brackets, provides stable power supply for the front-end data acquisition system—4G network camera through high conversion charging device. It is compact, portable, easy to install, disassemble and maintain compared with conventional system.

With advanced deep learning algorithm, Dahua WizSense 3 Series network camera supports intelligent functions, such as perimeter protection and smart motion detection. With starlight technology, this series camera provides a better image effect in the condition of low illuminance. Camera supports multi-angle flexible adjustment.

Read more

Technical Specification

Make Dahua Technology
Manufacturer Dahua Technology Ltd
Category IP Cameras products
Model code KIT/DH-PFM378-B60-W/DH-IPC-HFW3241DF-AS-4G/DH-PFA150
Series Solar Series
Chip Inch Size: 1/2.8 inch
Colour Type: Colour / Monochrome
Resolution: 1080p resolution
Digital (DSP): 1
Sensitivity Lux: 0.002
Motion Activated: 1
Focal Length mm: 2.8 mm; 3.6 mm; 6 mm
Wide Dynamic Range: 1
Back Light Compensation: 1
Auto Gain Control: 1
White Balance: 1
Electronic Shutter Range: 1/3 s–1/100,000 s
S/ N (Signal/ Noise) Ratio dB: >56
Compression Type: H.265; H.264; H.264H; H.264B; MJPEG (Only supported by the sub stream)
Electrical Specifications Voltage: 12 V DC
Power Consumption: 3.3 W
Network Properties Image Frame Rate: 25/30 fps
Interface: RJ-45 (10/100 Base-T)
Network Protocols: IPv4; IPv6; HTTP;TCP; UDP; ARP; RTP; RTSP; RTCP; RTMP; SMTP; FTP; SFTP; DHCP; DNS; DDNS; QoS; UPnP; NTP; Multicast; ICMP; IGMP; NFS; SAMBA; PPPoE; SNMP
Physical Specifications Weight g: 945
Dimensions mm: 228 x 204 x 87
Environmental Specifications Protection: IP67
Operating Temperature oC: -30 ~ +60 C (-22 ~ +140 F)
Operating Humidity %: ≤95
System Requirements Web Browser: IE: IE8/9/11, Chrome, Firefox
Additional info

Solar Power System

  • Integrated design, easy to install
  • Supports wall mount and pole mount with PFA150 bracket
  • Flexible angle adjustment of the solar panel and the camera
  • 60 W monocrystalline solar panel
  • Built sturdy to resist storms with sustained winds up to 117 km/h
  • (Note: The following four functions are only supported when battery power is used)
  • Remote monitoring available through the mobile app
  • Maximum Power Point Tracking (MPPT) charging controller
  • RS-485 communication
  • Electric protection

4G Network Camera

  • 2MP 1/2.8" CMOS image sensor, low luminance, and high definition image
  • Outputs max. 2MP (1920 × 1080)@25/30 fps
  • H.265 codec, high compression rate, ultra-low bit rate
  • Built-in IR LED, and the max. illumination distance is 50 m
  • ROI, SMART H.264+/H.265+, AI H.264/H.265, flexible coding, applicable to various bandwidth and storage environments
  • Rotation mode, WDR, 3D NR, HLC, BLC, digital watermarking, applicable to various monitoring scenes
  • Intelligent detection: Intrusion, tripwire (support the classification and accurate detection of vehicle and human)
  • Abnormality detection: Motion detection, privacy masking, no SD card,SD card full, SD card error, network disconnection, IP conflict, and illegalaccess
  • Support low power push alarm function; support the intergration of solar energy
  • Support the camera to get the power information through 485 link, and OSD overlay display
  • Alarm: 2 in,2 out; audio: 1 in, 1 out; 1 RS-485; supports max. 256 G Micro SD card
Download PDF version