Video Servers (IP Transmission) / Video Encoders  (521)

♦ Slots for 14 hot-swappable blades     ♦ Four Gigabit Ethernet ports     ♦ Redundant power supplies     ♦ Hot-swappable fan cassettes Ideal for large, professional installations AXIS Q7900 is a 4U, 19-inch rack that holds up to 14 hot-swappable blades.  The rack is one of the industry's highest-density rack solutions, enabling up to 84 analogue cameras to be integrated into an IP-based video surveillance system. It is ideal for large, professional installations that require outstanding performance and reliability, as well as ease of installation and maintenance. Scalability AXIS Q7900 offers flexibility and support for an expanding video surveillance system. When the rack is fully equipped with AXIS Q7406 Video Encoder Blades, 84 analog cameras can be supported. With four ports supporting Gigabit Ethernet, the rack can deliver multiple video streams from each of the 84 channels. Reliability AXIS Q7900 is a highly reliable unit. It has two redundant power supply units; if one of the power supplies needs to be replaced, no disruption to the rack's operation will occur. AXIS Q7900 also has hot-swappable fan cassettes that can be replaced without the need to cut off power. The rack supports PTZ and PTZ dome control through six RS-485 connectors at the back of each slot. Each slot also has connections for 12 external input and/or output devices, which allow for external alarm triggers and control of devices such as doors or lights in an event.

The demand for surveillance systems is growing, and the adoption of IP as a transport mechanism for video is ever increasing. Sony recognised this trend early on, and has been focused on developing products and solutions aligned with this trend. This year, Sony is pleased to announce the introduction of the NSR Series of recording servers.The key qualities of the NSR-1000 Series are a "hybrid" capability - these recording servers support both legacy analogue and current IP cameras - an open-platform design, and ease of setup and operation.  With the NSR-1000 Series, you can open the door to a world of new possibilities in video surveillance.Features include:High picture qualityHDMI outputs for "full HD" displays - You can view and monitor video via the HDMI interface with Full HD (1920 x 1080 displays.  If you use megapixel cameras, you can view the full resolution image with such equipment. What's more, you can set a 6-screen display layout and still view VGA video in full resolution.With Sony IP camerasMPEG4/JPEG dual stream - Connected with the SNC-RX Series, SNC-DS10, SNC-DM110, and later models from Sony, the NSR-1000 can accept both JPEG and MPEG-4 from the cameras at the same time.DEPA - Both the NSR & IMZ Series incorporate DEPA - Sony's Distributed Enhanced Processing Architecture. Used in conjunction with DEPA-enabled network cameras from Sony, DEPA helps identify critical events more easily, and provides a streamlined workflow for your video security operations.Expandability and flexibilityAdditional storage of 2TB x 7 - The NSR-1200/1100/1050H has an internal storage of up to 2TB/1TB/0.5TB respectively. Each can be connected with up to seven units of the NSRE-S200 (2TB Hard Disk Storage Device). With the NSR-1200 in RAID 5 configuration and the seven units of the NSRE-S200, the maximum recording capacity will be 11TB (approx.) in total. Remote viewing by controller software - If you install the bundled Controller Software to a personal computer in a remote location, you can supervise NSR-1000 Series recording servers simultaneously in various locations, with flexibility in selecting and viewing live and recorded images.IMZ-NS100 Series - In the same series of software solution, Sony also provides the IMZ-NS101/ NS104/NS109/NS116/NS132 Intelligent Monitoring Software. This can be installed on your own Microsoft® Windows® server to monitor and control 1/4/9/16/32 network cameras, respectively. It features the same functionality and graphical user interface as the NSR-1000 Series. The supplied Controller Software can be used for the multiple NSR-1000 Series and IMZ-NS100 Series.

More video servers in less space – quick, flexible and professional installation and service.With the AXIS Video Server Rack you can mount a large number of video servers in an industrial 19” environment, thus creating a size effective network video server solution for demanding needs, all with a common power supply.  The AXIS Video Server Rack provides high reliability and functionality combined with quick, flexible and professional installation.Key benefits:Provide quick and professional installation of video servers Better serviceability, quick replacement of units (hot swap) without the need to disconnect control cabling (connected to the back plane of the rack) Easy to expand system by just adding blades and wire it up (if rack holds available slots) With the integrated power supply it combines easy installation/expansion with an ability to easily add back-up power solutions - all compared to today’s option of stand alone video servers and rack mount Higher density of video channels compared to stand alone solution Improved TOC, based on above benefits

Explore the best video security options through our unique hybrid technology solutions Advance your capabilities with Sony's NSR-1000 Series that gives you the foundation to embrace different technologies. You can mix and match different equipment; integrate your existing system with new solutions; and migrate to the future of video security, IP and full HD, at your own pace. IP cameras offer many benefits over their analogue counterparts - such as greater flexibility, integration, functionality and return on investment. As such, IP is set to become the future of video security. However, if you're already heavily invested in an analogue system, you may think it's too disruptive and costly to make the move right now. Thankfully, it's not the case. With Sony's NSR-1000 Network Surveillance Server, you can lay the foundations of your future IP system, while maintaining full support of your existing analogue installation.Benefits include:Hybrid operation. The NSR-1000 series accepts up to 16 analogue cameras and up to 64 IP cameras - so you can operate a mixed analogue/IP camera environment, seamlessly. This gives you a risk-free migration route to the world of IP. Start small if you like with just one IP camera. Then add more cameras as required or when your budget allows.Open platform. The NSR-1000 series is an open platform. It is compatible with all of Sony's analogue and IP cameras, plus all third-party analogue cameras and many third-party IP cameras. It also supports a variety of third-party software solutions through Sony's ISV programme.Easy to set up and use. The on-board set-up wizard automatically detects Sony-branded IP cameras, so you don't have to spend time manually inserting IP addresses etc. It also assigns camera images to the monitor layout automatically, so you can start monitoring straight away. Furthermore, the intuitive graphical user interface makes searching, previewing and playing back recorded video a breeze.DEPA intelligence. If you choose Sony for your IP camera, you can also get the added benefit of DEPA - Sony's Distributed Enhanced Processing Architecture. This will help you to identify critical events more easily through Intelligent Video Analysis, which will streamline your video security operations.

Comprises: NET101T-Single-channel video transmitter with integrated Ethernet connection. NET101R-Single-channel video receiver with integrated Ethernet connection. NET101T-A-Single-channel video transmitter with bi-directional audio and integrated Ethernet connection. NET101R-A-Single-channel video receiver with bi-directional audio and integrated Ethernet connection.

The key qualities of Sony's new NSR-1000 Series are a "hybrid" capability - these recording servers support both legacy analogue and current IP cameras - an open-platform design, and ease of setup and operation. With the NSR-1000 Series, you can open the door to a world of new possibilities in video surveillance.Key benefits of a hybrid systemEasy migration from analogue to IP camera system Up to 16 analogue cameras can be connected to the NSR-1000 Series. You can simply add network cameras, including megapixel cameras, while maintaining your analogue cameras. Easy to migration to large-screen HDTV display systemsThe NSR-1000 Series has two analogue RGB and two HDMI™ monitor output connectors on the rear panel. You can use two out of the four outputs simultaneously in any combinationto meet your system requirements. Easy to migration into HD camera systemsTo answer to the growing demands for HD (high-definition) network cameras, the NSR-1000 Series plans to support this capability in the near future.Open platformFreedom to select from a wide range of cameras The NSR-1000 Series can be used with Sony IP cameras and IP cameras from other manufacturers as well.Quick setup & easy operationQuick setupWith the set-up wizard, you can set up the system in a simple manner.  The setup wizard detects Sony IP cameras in the system, which drastically reduces the time required for setup.  With Sony's IP cameras, the NSR-1000 Series detects the cameras instantly, which drastically reduces the time required for the system installation.  Images from cameras are assigned to a Monitor Layout automatically so that you can start monitoring instantly. Intuitive graphical user interfaceYou can search, preview, and play back the recorded video with an intuitive user interface.Read more: Sony NSR-1000 Series hybrid recorders win Innovation Award at SECTECH

Panasonic WJ-NT304/314 is a 4CH MPEG-4/JPEG dual streaming video encoder.

Compatible with NAS5520. Dimensions: 425 x 42 x 463. Voltage: 100 - 240 VAC.

Significant additions to Panasonic's acclaimed i-Pro range were showcased, including the WV-NS950 and WV-NW960 indoor and outdoor Colour Network Dome cameras; equipped with intelligent surveillance performance and high image quality including Auto Tracking, dual streaming and Super Dynamic III technology, and the new four channel WJ-NT314 video encoder unit; featuring video analytics to track and detect suspicious activity. The highly anticipated launch of the new megapixel range was also available to view and experience. With products designed with the objective of securing today's world and making surveillance accessible and possible to all, whilst continuously challenging the boundaries of surveillance - Panasonic's stand was the place to be for all your security requirements.With technical, sales and product representatives on hand to answer any questions, Panasonic's stand provided an interactive learning arena in which to demonstrate its products capabilities in an accessible and user-friendly way.

Designed specially for security software applications. Allows anyone to easily manage the recording and playback of image data from Sanyo Network Cameras or Sanyo Network Video Servers linked via existing local or wide area networks. Software can be viewed and operated by Internet Explorer and JPEG2000 plug-in.

The LSDDC is an amplifier interface card for the use with the M100, M200, and M400 class D amplifier mainframe for voice alarm and public address applications. Dimensions: 87 x 79 x 130 mm. Weight: 250 g. Temperature: -5 ~ +50 °C. Humidity: 0 ~ 93%.

Storage extension unit to increase recording capacity for the RX360 and RX320 Series for long period recording requirement.

ANPR central configuration server.  Access by web (with login & password).

ANPR central configuration server.  Access by web (with login & password).  Dimensions: 235 x 155 x 400 mm.

The AEL02 Active End of Line Device enables ASL amplifier systems to monitor either single or dual loudspeaker circuits without the need for DC blocking capacitors in the loudspeakers. This makes it ideal for retrofitting into existing installations where it is not possible to modify the installed loudspeakers. Dimensions: 160 x 100 x 81.  Operating temperature: -5 ~ +50. Operating humidity: 0 ~ 93. IP65.

The SSINT is an amplifier interface card for the use with the M100, M200, and M400 class D amplifier mainframe for voice alarm and public address applications. Dimensions: 87 x 79 x 130 mm. Weight: 250 g. Temperature: -5 ~ +50 °C. Humidity: 0 ~ 93%.

The LSIDC is an amplifier interface card for the use with the M100, M200, and M400 class D amplifier mainframe for voice alarm and public address applications. Dimensions: 87 x 79 x 130 mm. Weight: 250 g. Temperature: -5 ~ +50 °C. Humidity: 0 ~ 93%.

The NSINT is an amplifier interface card for the use with the M100, M200, and M400 class D amplifier mainframe for voice alarm and public address applications. Dimensions: 87 x 79 x 130 mm. Weight: 250 g. Temperature: -5 ~ +50°C. Humidity: 0 ~ 93%.

Interactive management tool for the administration of VideoJet systems in Ethernet networks.

Wall mount. Integrated listening ability assists in the alarm verification process, while transmission of the operator's voice to the site provides instant intruder control. ADPRO ® FastVu TM uses sophisticated audio compression techniques to ensure that high-quality, bi-directional audio uses the minimum possible bandwidth of the communications channel. (Part number is 200907).

Rack mount. Integrated listening ability assists in the alarm verification process, while transmission of the operator's voice to the site provides instant intruder control. ADPRO ® FastVu TM uses sophisticated audio compression techniques to ensure that high-quality, bi-directional audio uses the minimum possible bandwidth of the communications channel. (Part number is 200827).

The DV-IP range features 4, 9 and 16 input high performance Uni-cast Network Video Servers with a real time operating system providing a simple and cost-effective way of digitising, recording and distributing high-quality live and recorded video across a network or the Internet to a viewer's PC. Choice of 40 80, 160, 320 & 500 GB HDD. Triplex multiplexer action.

Verint’s Nextiva range of wireless and IP security solutions for the overseas, UK and Mainland Europe markets are now available.  The new products provide the latest in our solutions of wireless and IP devices for managing perimeter or town centre security. Verint’s Nextiva products also enable truly cost effective migration of analogue CCTV cameras to IP networks.The Verint Nextiva S1500e is designed for video monitoring and surveillance over IP networks.  It delivers high-quality MPEG-4-based video over 10/100Base-T networks using cat 5, fibre optic, and wireless media.  The servers can easily be extended over local and wide area networks (LANs and WANs) or the Internet using ISDN, PSTN, or xDSL routers.  These Ethernet video servers are built on open standards and are entirely firmware upgradeable to provide long-term investment protection.The Verint Nextiva S1100w is a wireless video transmitter that allows digital video transmission over two license-free wireless bands (5.3/5.8 GHz).  It delivers high-quality MPEG-4-based video at 30 frames per second (fps).  The S1100w is specifically designed to allow deployment of cameras in hard-to- wire locations, or to quickly extend the reach of your wired CCTV system. 

Digital high-speed video recording with MPEG-2. Especially made for real time recording. 8 camera channels per encoder and 8 audio stereo channels per encoder. Particularly suitable for casinos. Light version SSC/VE8M2/200 L available that has 352 x 288 resolution.

Video resolution: 704 x 576 pixels (HiRes), 352 x 288 pixels (CIF), 176 X 144 pixels (QCIF). Approvals: EMC: CE, EN 55103-1: 1996, EN55103-2:1996. 2 compression standards: H.323 and M-JPEG. 1 relay output, 1 alarm output.

Video loss detection for each channel. Video-database and online storage up to 32 TByte. Remote control via RS-232 communication port or via TCP/IP. Alarm handling - priority or exclusive alarm recording and display.

Video loss detection for each channel. Video-database and online storage up to 32 TByte. Remote control via RS-232 communication port or via TCP/IP. Alarm handling - priority or exclusive alarm recording and display.

RIVA RE4000-R12 is a 4 channel network video encoder used for blade card for installation into RIVA´s rack solution RE12K. It disposes of 4 audio inputs and 1 audio output as well as 4 digital inputs and 2 digital outputs. The H.264 encoder with dual stream offers a maximum resolution of 25/30 fps@D1.

RIVA RE4000-R40 is a 4 channel network encoder blade card with H.264 for installation in RIVA´s rack solution RE40K.

5012-0338 is a 4 channel D1 H.264 network video encoder blade card. It has motion detection, burnt-in text and built-in video contents analysis. Furthre protocols: SNTP, mDNS, UPnP, SMTP, SOCK, IGMP,DHCP, FTP, DDNS, SSL v2/v3, IEEE 802.1X, SSH.

5012-0337 from TDSi is a 4 channel D1 H.264 network video encoder blade card. It has a 4 channel audio input, 1 channel audio output. It also has motion detection and burnt-in text.

5012-0334 is a 4 channel  D1 H.264 network video encoder. The H.264 based IP Encoder, supporting 4 channels at 100/120 fps in all resolutions up to D1, provides UDP’s video analytics as a standard feature.

16 channels, 16, M-JPEG, TCP/IP, Ethernet, 30 JPEG images/sec, 12 V DC, 5 ~ 55

5012-0481 19”, 4U network video encoder rack solution. It has hot-swappable encoder blades, fan units and power units.

5012-0330 is a 1 channel D1 network video encoder. It has burnt-in text, video motion detection support. Additionally, it has USB 2.0 support (external storage, wireless LAN). Further protocols: SNTP, mDNS, UPnP, SMTP, SOCK, IGMP, DHCP, DDNS, SSL v2/v3, IEEE 802.1X, SSH.

The Verint Nextiva is designed for video monitoring and surveillance over IP networks. The S1508e server provides a cost effective solution for applications where a high concentration of cameras are terminated within the same area. It delivers high-quality MPEG-4 based video over 10/100 Base-T networks using cat 5, fibre optic and wireless media. Configuration and management are made easy with the nDVR,  LVM, or SConfigurator software.

Optelecom-NKF released its S-40, a new, compact MPEG-4 video server that converts analog video into IP/Ethernet MPEG-4 streams.  The S-40, attractive in price and design, brings IP video surveillance within reach of a broad range of customers.By developing the S-40 video server, Optelecom-NKF anticipated the rising demand for professional surveillance solutions based on analog camera inputs.  Because of its simple (user-friendly) plug-and-play functionality, the S-40 is the perfect solution for migrating from existing analog systems to digital video surveillance systems.The S-40 MPEG-4 streaming video is optimised for both low bandwidth and Hi-Res DVD-quality video applications.  It offers streaming audio, data, dry contacts, video motion detect, and pre-recording.  The compact and stylish housing is developed to ensure a wide operating temperature range.  This versatile MPEG-4 video server is well suited for almost any CCTV or camera monitoring application.Based on the latest DSP technologies, the S-40 video server has a dual core MPEG-4 encoder, enabling it to simultaneously stream two different video formats to multiple IP destinations, e.g., one full frame-rate stream monitoring and one time-lapsed dedicated for storage on the i-NVR.“The S-40 video server helps our customers leverage their investment in existing analog security systems while increasing flexibility and functionality in a network environment,” stated Edmund Ludwig, Optelecom-NKF’s president and CEO.  “This new MPEG-4 video server is the latest addition to our Siqura™ surveillance solution and is interoperable with our MX™ Software Suite, Operator Office™, and i-NVR product suite.”Features: Low-cost compact MPEG-4 video serverDVD-quality videoDual core encoderMulti-stream support Video motion detectLocal pre-recording2-way audio, (PTZ) data and contact closuresPassword protected Web-interfaceSNMPv2 network management‘Snap-in’ mounting bracketSiqura™ is Optelecom-NKF's versatile platform for building integrated IP networked surveillance systems.  The power of Siqura™ is the top-grade consultancy, design, supply and implementation support that comes along with it. 

Designed for the European market and certified to the latest regulations, Verint’s Nextiva IP Video Servers are built on open standards for flexible deployment and maximum compatibility with existing security and IT systems. Delivering high quality images and utilising the latest digital encryption and authentication, the robust, class-leading Nextiva S1700e lets users transmit video images using standard IT network technology.The S1700e provides an option to use IEEE 802.3af compliant Power-over-Ethernet support which simplifies installation, reduces cabling runs and can send up to 5 watts (12VDC) of power to a camera.  Ideal for high-resolution video monitoring and surveillance applications, the S1700e delivers 4CIF, 25 frames per second, MPEG-4-based video over 10/100Base-T networks using cat 5, fibre optic and wireless media.  The server, in conjunction with Verint’s wireless devices supports both simple ‘point-to-point’ (S1100w) and complex multi-point (S3100) wireless system configurations.Incorporating remotely upgradeable firmware and extended temperature range options, the S1700e is robust, reliable and easy to maintain - with the S1700e, intelligent anywhere/anytime video becomes a practical reality.The S1700e provides a single camera input, and is part of a wider range of video servers; the S1708e provides 8 inputs and the S1712e provides up to 12 camera inputs.  The Power-over-Ethernet option is only available with the S1700e.

Designed for video monitoring and surveillance over IP networks, the S1600e server delivers high-quality MPEG-4 based video over 10/100 Base-T networks using cat 5, fibre optic and wireless media. The server can easily be extended over local and wide area networks (LANs and WANs) or the Internet using ISDN, PSTN, or xDSL routers. The video server is built on open standards to provide long-term investment protection. The S1600e comes as two units: a video encoder (S1600e-T) with one analogue video input, and a video decoder (S1600e-R) with one analogue video output (PAL/NTSC). Configuration and management are made easy with the SConfigurator software, Telnet support and via IE 6.0. 

Verint’s Nextiva™ Intelligent Edge Devices are built to meet the challenges of today’s distributed IP-based video networks.  From single port Ethernet Video Servers for indoor use through to DVD-quality multi-port IP solutions complete with onboard analytics, the Verint Nextiva Intelligent Edge Devices offer solutions for every need:Nextiva S1708e – DVD quality for multi-camera environmentsNextiva S1712e – Lower frame-rates for multi-camera environmentsNextiva S1724e – 24 video inputs/outputs, optimised for high port-countNextiva S1900e – DVD quality for single-camera applications, featuring Power over Ethernet and an auxiliary power camera feed, reducing cabling requirements and transforming your CCTV cameras into cost-effective, intelligent IP sensorsWith Verint’s cost effective solutions, you are able to capture images virtually anywhere and analyse them at the point of capture.  Security and performance challenges across a wide range of environments can readily be met, and actionable intelligence delivered from an IT-friendly platform.     Book your Nextiva seminar now