Video Servers (IP Transmission) / Video Encoders (748)

Built-in 24 port PoE switch, 6TB video storage, and fully licenced with 24 channels of CompleteView Pro video management software Provides a secure, enterprise class, distributed video surveillance architecture Just add cameras for a fully capable, enterprise class video surveillance solution, that can operate standalone (unit provides up to 4K resolution monitor output) or as an integrated Symmetry solution
Add to Compare
Built-in 24 port PoE switch, 4TB video storage, and fully licenced with 24 channels of CompleteView Pro video management software Provides a secure, enterprise class, distributed video surveillance architecture Just add cameras for a fully capable, enterprise class video surveillance solution, that can operate standalone (unit provides up to 4K resolution monitor output) or as an integrated Symmetry solution
Add to Compare
Built-in 24 port PoE switch, 2TB video storage, and fully licenced with 24 channels of CompleteView Pro video management software Provides a secure, enterprise class, distributed video surveillance architecture Just add cameras for a fully capable, enterprise class video surveillance solution, that can operate standalone (unit provides up to 4K resolution monitor output) or as an integrated Symmetry solution
Add to Compare
Built-in 16 port PoE switch, 32TB video storage, and fully licenced with 16 channels of CompleteView Pro video management software Provides a secure, enterprise class, distributed video surveillance architecture Just add cameras for a fully capable, enterprise class video surveillance solution, that can operate standalone (unit provides up to 4K resolution monitor output) or as an integrated Symmetry solution
Add to Compare
Built-in 24 port PoE switch, 18TB video storage, and fully licenced with 24 channels of CompleteView Pro video management software Provides a secure, enterprise class, distributed video surveillance architecture Just add cameras for a fully capable, enterprise class video surveillance solution, that can operate standalone (unit provides up to 4K resolution monitor output) or as an integrated Symmetry solution
Add to Compare
DFVSM1-T video transmitters/receivers and multiplexers support 10-bit PCM digital video transmission that provides no video degradation versus optical path loss. All modules are laser-based and optimized for highest optical performance on either one multi-mode or single mode fiber.
Add to Compare
Streamlining commerce, cars, and safetyDubai is incontestably one of the most financially pivotal cities in the Gulf region, but any businessman will tell you that sitting in a traffic jam in the sweltering desert heat is certainly not what makes the city a success. Yet, since Dubai absorbs a good deal of the interchange between international companies, this worldly city has inevitably been confronted with growing rates in traffic accidents and congestion.However, the Dubai Roads and Transport Authority (RTA) has definitely not stood still while cars pile up in their seaside city. Rather, they took direct action to reduce mishaps and bottlenecks by introducing a state-of-the-art intelligent traffic system (ITS). The system has been instrumental in decreasing traffic collisions as well as improving traffic flow.FALCON in flightRTA contracted Scientechnic, a leading project engineering and system installation company, to undertake the implementation of an ITS throughout Dubai's traffic infrastructure. This system is known as the Freeway and Local Coordinated Operations Network (FALCON) and the project entailed designing a system capable of transmitting large amounts of real-time data from various sources, such as sensors and cameras, over an IP fibre optic network. Ultimately, the system has come to include a number of cutting-edge traffic technologies, including automatic incident detection (AID) and centralised traffic management.An intelligent infrastructureTasked with the construction of a robust traffic management system, Scientechnic designed a fully integrated network, incorporating the existing infrastructure, such as arterial and expressway traffic signals, as well as a plethora of new technologies into the ITS. In order to realise these plans, an IP network had to replace the existing point-to-point analogue system. This required innovative technology that could both cleverly connect the enormous number of streams involved and handle the extreme heat of the region's climate. It was clear that a smart and sturdy switch was vital to the success of this project.In general, switches are the nucleus of a network. They receive and analyse data packets so as to appropriately dispatch the information to the relevant locations. A good switch is capable of both ensuring quality network performance and conserving bandwidth. Yet with the vast and varied data packets being sent over Dubai's ITS network and the need for a switch that could function in such high temperatures, finding just the right hardware to carry out the task at hand was a project all on its own.Ultimately, the solution was made possible through Siqura, a leading global supplier of advanced video surveillance solutions, which provided the FALCON project with its Siqura® XSNet™2800 SW switches.As Scientechnic's Brijesh Moothat explains: "The Siqura switches fit seamlessly into our entire project, and the local support from Siqura provided a key resource in designing this architecture. The XSNet 2800 SW switch was chosen due to its capability of performing in a high operating temperature. The Gulf countries, being one of the hottest places during summer, require that all field equipment can endure an extended temperature range. Siqura XSNet switches have an operating temperature of up to 75° C, which makes them suitable for operation in the Middle East."Directing traffic in DubaiOnce united by Siqura switches, Dubai's ITS revolves around servers, field devices, system applications, and management and viewing software, each part helping to make traffic flow safer and more efficient.Populating the streets of Dubai are a number of sensors and cameras, which are connected to a CCTV system and servers. While, on the one hand, these devices allow operators in a control room to monitor the overall traffic situation, dedicated servers also apply incident detection algorithms to the video. These algorithms enable the system to detect an array of events, from pedestrians, stopped vehicles, wrong-way drivers, and lost cargo to queuing, speed drops, and even the presence of smoke. Detected incidents can then trigger alarms to alert operators, as necessary.From centralised control rooms, operators can then instantly evaluate the severity of a situation and respond quickly and confidently. This may entail adjusting lane control signs, variable speed signs, or dynamic message signs (DMS) as well as informing authorities, such as the police, fire department, or emergency medical services.The Dubai ITS also includes an option for traffic authorities to define and customise emergency protocols for specified events, such as a fire in a tunnel. Equipped with such precise and prepared response plans, operators can competently and consistently initiate just the right reaction to possible occurrences. In this way, traffic in Dubai can continue more smoothly and safely, despite obstructions or mishaps.Motorists themselves benefit twofold from this intelligent and integrated traffic management system. First of all, since traffic is directed effectively through DMS and variable lane and speed signs, bottlenecks in Dubai are less of a burden. Additionally, up-to-date traffic information is made available to drivers via a graphical user interface on the Web, in information kiosks, or text messaging services. As a result, travellers can plan their route so as to literally steer clear of any congestion.Reliable roadsAs business and commerce in the Middle East expand at astonishing rates, roads are jamming up almost as soon as they open. Worldwide, gridlock and traffic jams continue to detrimentally impact people's lives as well as the economy. Yet drivers hitting the highways in Dubai today can now depend on the ITS, implemented by Scientechnic and connected through Siqura switches, to make it easy to get where they're going. The ease with which authorities, operators, and travellers alike can plan and react to traffic situations reveals once more just how helpful innovative traffic technologies can be.
Add to Compare
ComNet NWK3 point-to-point wireless ethernet kit allows a single Ethernet data stream to be transmitted between a Client remote location and the Access Point or head end. A simple, easy to read LED array displays unit operational status along with received signal strength, ensuring optimal installation and operation.
Add to Compare
ComNet NW3 point-to-multipoint wireless ethernet link can be configured through the embedded User Interface as a Client or as an Access Point. This point-to-multipoint model allows multiple Ethernet endpoints to be connected to a central Access Point. Up to 15 endpoints can be linked to a central access point. The NW3 supports up to 95Mbps throughput due to MIMO technology. An easy to read LED array displays unit operational status along with received signal strength ensuring optimal installation and operation.
Add to Compare
IFS SP-PoE IEEE 802.3af Power over Ethernet Splitter network transmission provides the ability to use IEEE 802.3af power source equipment (PSE) as part of a cost-effective and efficient power distribution cable management solution for non-PoE Ethernet edge devices. At the point of deployment, the IFS Power over Ethernet Splitter can be used to separate Ethernet data and provide 5V or 12V DC power to a non-PoE edge device on the network. This device facilitates easier network planning by eliminating restrictions of edge device placement near AC power outlets and reduces the need for AC wiring and installation costs while delivering higher reliability.
Add to Compare
ComNet NWK1 point-to-point wireless ethernet kit allows Ethernet data to be transmitted between a Client remote location and the Access Point or head end. The NWK1 supports up to 95Mbps throughput due to MIMO technology. An easy to read LED array displays unit operational status along with received signal strength ensuring optimal installation and operation. The unit can be powered by an IEEE 802.3af/at PoE compliant device or through the supplied power injection module.
Add to Compare
ComNet NW7 environmentally hardened High Throughput (HT) wireless ethernet transmission device can be configured through the embedded User Interface as a Client or as an Access Point. This single radio model is designed for high throughput point-to-point or multi-point applications and comes with an integrated 19dBi, 17º beamwidth antenna.
Add to Compare
IFS POE302-MS IEEE 802.3at 4-Port Fast Ethernet/PoE-af Mid-span Injector is a quick and easy solution that can be used when a network device does not provide the functionality as a power source equipment (PSE), such as a non-PoE switch, and yet several edge devices being deployed are PoE powered devices (PD).
Add to Compare
The VDS1132-RV model provides for the simultaneous transmission of 1 video signals, 2 audio signals and 3 data signals over one multimode or single mode optical fiber. The use of 8-bit video sampling provides extremely high video quality. DIP selectable RS-232, RS-422, RS-485 2-wire or4-wire, manchester or bi-phase and contact closure signal. The modules are available in either stand-alone or rack mount versions.
Add to Compare
ComNet NW8 dual radio wireless ethernet device is designed to be used with an external antenna and is used for redundant ring and drop & repeat topologies. Both radios can be configured through the embedded User Interface as a Client or as an Access Point. Radio 2 supports 5GHz operation and is connected to the 19dBi internal antenna. Radio 1 is user selectable for 5GHz or 2.4GHz and connects to an external antenna.
Add to Compare
The VDS21688-E model provides for the simultaneous transmission of 16 video signals, 8 audio signals, 8 data signals and ethernet over one multimode or single mode optical fiber. The use of 10-bit video sampling provides extremely high video quality. DIP selectable RS-232, RS-422, RS-485 2-wire or 4-wire, manchester or bi-phase and contact closure signal. The modules are available in either stand-alone or rack mount versions.
Add to Compare
The VDS21600 model provides for the simultaneous transmission of 16 video signals over one multimode or single mode optical fiber. The use of 10-bit video sampling provides extremely high video quality. The modules are available in either stand-alone or rack mount versions.
Add to Compare
A 2U rack mount premium server designed to handle the most demanding IP Video surveillance requirements utilising highly scalable and extended storage options, maximum I/O throughput, and robust processing capability, making it ideally suited for intensive digital video processing CPU: Intel Gold Xeon Memory: 96 GB Storage (OS): 2 EA – 480GB SSD RAID1 Storage (Video): 60 TB - 192 TB RAID 5; 24 TB - 168 TB RAID 6 (optional hot spares) DAS Support: Yes (RAID card required) Network: Dual Port 10GbE BASE-T & Dual Port 1GbE BASE-T
Add to Compare
The VDS2478-E model provides for the simultaneous transmission of 4 video signals, 8 audio signals, 7 data signals and ethernet over one multimode or single mode optical fiber. The use of 10-bit video sampling provides extremely high video quality. DIP selectable RS-232,RS-422, RS-485 2-wire or 4-wire, manchester or bi-phase and contact closure signal. The modules are available in either stand-alone or rack mount versions.
Add to Compare
MobileView Mobile Radio Transmitter (MRT) combines WiMAX and Wi-Fi radio technologies into one ruggedized, vehicle-mounted device. This unique combination makes MRT perfect for real-time information exchange, surveillance and vehicle tracking. By integrating WiMAX client and Wi-Fi AP functions in a single package, the MRT provides long-range, high-capacity WiMAX connectivity while simultaneously creating a Wi-Fi hotspot.
Add to Compare
The VideoIQ Rialto R-Series is a modular video analytic appliance with support for up to sixteen IP, analogue or thermal cameras. Businesses can add advanced video analytics to new or existing surveillance systems and effectively monitor and manage their video surveillance solution via their Smartphone or Tablet when deployed with VideoIQ Mobile. The R-Series is compatible with virtually any 3rd party IP, analogue or thermal cameras, and does not require infrastructure upgrades. It has a slim 1U rack-mount design, up to 2TB of onboard RAID storage and a modular, expandable selection of analogue and IP blades. Transform a passive surveillance system into a crime prevention solution using any of the Rialto products.
Add to Compare
The XX-Mediaserver implements WM stream distribution in the network or in the backbone. The server is equipped with a monitor event viewer and log event recorder in order to call up and document current and statistical data from clicks. (IP address, time, date, duration etc).
Add to Compare
These IFS video transmitters/receivers and multiplexers support 10-bit PCM digital video transmission that provides no video degradation versus optical path loss. All modules are laser-based and optimised for highest optical performance on either one multi-mode or single mode fiber.
Add to Compare
These IFS video transmitters/receivers and multiplexers support 10-bit PCM digital video transmission that provides no video degradation versus optical path loss. All modules are laser-based and optimised for highest optical performance on either one multi-mode or single mode fiber.
Add to Compare
These IFS video transmitters/receivers and multiplexers support 10-bit PCM digital video transmission that provides no video degradation versus optical path loss. All modules are laser-based and optimised for the highest optical performance on either one multi-mode or single mode fiber.
Add to Compare
These IFS video transmitters/receivers and multiplexers support 10-bit PCM digital video transmission that provides no video degradation versus optical path loss. All modules are laser-based and optimised for the highest optical performance on either one multi-mode or single mode fiber.
Add to Compare
The VDS2838-E model provides for the simultaneous transmission of 4 video signals, 8 audio signals, 7 data signals and ethernet over one multimode or single mode optical fiber. The use of 10-bit video sampling provides extremely high video quality. DIP selectable RS-232,RS-422, RS-485 2-wire or 4-wire, manchester or bi-phase and contact closure signal. The modules are available in either stand-alone or rack mount versions.
Add to Compare