CCTV Mounts  (1,232)

AM-313 is a pole mount adapter.

MOBOTIX MX-HALO-SP-EXT-PW is a high-quality speaker available in white or matt chrome finsih. It is directly connected to the camera housing via a two-wire cable without an additional power supply unit being needed. In connection with the microphone that is integrated into the sensor module of every S14D/S15D, it turns those cameras into a two-way communication system. The tiltable speaker is integrated into the HaloMount and can be mounted easily and neatly in ceilings or walls.

Integrated electromagnetic anti-theft protection. Includes special key for module unlocking, housing seal and installation material.

MX-OPT-Box-3-EXT-ON-PW is a triple on-wall metal-reinforced housing.

Compatibility - Suitable for: Q2x, D2x, ExtIO

MOBOTIX offers SurroundMoun for surveillance of long and narrow spaces. The 25° tilt of the two sensor modules on the SurroundMount allows the area directly underneath them to be captured without blind spots. Two sensor modules can be integrated in the mount. It is suitable for ceiling installation, with a 25° tilt of the lenses.

SpeakerMount is a high-quality speaker available in white or matt chrome finsih. It is directly connected to the camera housing via a two-wire cable without an additional power supply unit being needed. It turns cameras into a two-way communication system.

Finish: Epoxpolyester powder painting, RAL 9002 colour Mounting Hardware: Stainless steel screws

Pole mount for use with H5EX-compact bullet cameras. For pole diameters from 60 mm (2.36”) to 200 mm (7.9”). Max load 30 kg (66 lb). AISI 316L stainless steel.

MOBOTIX MX-D15-OPT-WHMH-Set is a set consisting of pole/corner mount (MX-MH-Dome-ESWS) and wall mount (MX-WH-Dome). The white stainless steel pole/corner mount, for fastening of dome wall mount, can be mounted to 90-degree corners; one DualDome covers two sides. The white wall mount consists of shock-resistant fibreglass-reinforced plastic (PBT). It has ample room inside for extras (WiFi, relay, etc.).

Vivotek AM-114 is a gray outdoor pendant head made of aluminium alloy. It supports AM-116 and AM-117 pendant pipes.

AM-525 is a mounting adapter for outdoor dome.

Vivotek AM-118 is a white indoor pendant head made of aluminium alloy. It supports AM-116 and AM-117 pendant pipes.

Vivotek AM-116 is a 20cm gray pendant pipe made of aluminium alloy. It supports AM-114 and AM-118 pendant heads for ceiling, AM-117 pendant pipe for extention, AM-212 and AM-221 brackets for wall as well as AM-51A, AM-518, AM-520, AM-522 adapters.

Vivotek AM-117 is a 40cm gray pendant pipe made of aluminium alloy. It supports AM-114 and AM-118 pendant heads for ceiling, AM-116 pendant pipe for extention, AM-212 and AM-221 brackets for wall as well as AM-51A, AM-518, AM-520, AM-522 adapters.

AM-527 is a mounting adapter for indoor dome.

Camera Mounts, Aluminum Alloy, 414, 240.6 x 103.8 x 61 mm

MOBOTIX MX-FLEX-OPT-DM-PW is a dual camera mount that are positioned directly next to each other and in parallel. This orientation of the sensor modules for the same area being surveilled makes the S14D/S15D a suitable camera for day and night use – the same image area can be seen as a color image during the day and as a black/white image at night. The DualMount can be used with all available sensor modules and enables an installation of the lenses on the ceiling with a downward tilt of 25°. The DualMount can also be installed outdoors, e.g., under eaves, bridges, etc.

AM-713 is an outdoor conduit box.

Supported Models: ND9441, ND9541, ND9442P, ND9542P

Supported Models: FD9182-H, FE9192-H  

It's suggested that the recessed kit should be installed on a robust surface such as a wooden plate. This product is recommended for indoor environments.

MOBOTIX MX-FLEX-OPT-SM-PW is a camera mount that allows the area directly underneath them to be captured without blind spots. It is surveillance of long and narrow spaces. The two sensor modules can be integrated in the mount. It is suitable for ceiling installation, with a 25° tilt of the lenses.

Pole mount, Steel, 800, 265 x 120 mm

Stainless steel Washer tank for Cameras with Wiper model (TNP-6320E2W-Z, TNP-6320E2WF-Z, TNP-6320E1W-Z, TNP-6320E1WF-Z, TNO-6070E2WF-Z, TNO-6320E2WF-Z, TNO-6070E1W-Z)

Mount screw size : PF 1 1/2" Color : White

Metal ceiling panel for H4 in-ceiling dome cameras. Including H4A-DC and H4SL-DC. Provides extra support for High Definition H.264 In-Ceiling IP Dome Cameras Replaces or reinforces ceiling tiles in suspended ceiling installations

The SHD-315F Kit provides an economical, integrated solution for 2x2 indoor suspended ceiling application for PNM-9084RQZ & PNM-9085RQZ multi-directional cameras.

Adaptor plate for single, double, 4" octagon

Back box with knockouts

DB25 to 12x RCA audio connectors for audio input for various DVRs, when using more than 4x inputs.

Stainless steel Top mounting bracket

Adaptor plate for single, double, 4" octagon

Aluminum and steel construction 6? length 1"x2" cable outlet opening for through-column cable routing for an uncluttered look Cover plate for instances where cable outlet opening is not used Compatible with all ivory Hanwha Hanging Mounts

Aluminum backbox for fisheye & flateye cameras, in ivory

Finish: Epoxpolyester powder painting, RAL 9002 colour Mounting Hardware: Stainless steel screws and cable straps (for ES-HD-MNT-POLE-LG) Pole Diameter: 210 mm to 225 mm

Stainless steel pole mount adaptor

Easy to use and install floor stand for TNM-3620TDY, SPI-35B, and other box cameras. Extends between 50"-75" Includes camera swivel adjustment

Finish: Epoxpolyester powder painting, RAL 9002 colour Mounting Hardware: Stainless steel screws Pole Diameter: 80 mm to 150 mm

Mounting accessory with SHB-9000H Optional sales